2017-2020 Aerodynamic Regulations Thread

Here are our CFD links and discussions about aerodynamics, suspension, driver safety and tyres. Please stick to F1 on this forum.
User avatar
hollus
Moderator
Joined: 29 Mar 2009, 01:21
Location: Copenhagen, Denmark

Re: 2017-2020 Aerodynamic Technical Regulations

Post

Same reason they were banned,I guess. If they break their seal, the downforce disappears too suddenly. So safety.
Rivals, not enemies.

ENGINE TUNER
ENGINE TUNER
25
Joined: 29 Nov 2016, 18:07

Re: 2017-2020 Aerodynamic Technical Regulations

Post

hollus wrote:
27 Dec 2020, 02:03
Same reason they were banned,I guess. If they break their seal, the downforce disappears too suddenly. So safety.
Understandable, but isn't that also the case for the front wings? I wonder if they were considered, a rubber skirt like on a hovercraft would get the job done.

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: 2017-2020 Aerodynamic Technical Regulations

Post

hollus wrote:
27 Dec 2020, 02:03
Same reason they were banned,I guess. If they break their seal, the downforce disappears too suddenly. So safety.
Also, according to Dernie and Murray(?), they scuffed/broke up the track surface. Promoters wouldn't want to have to resurface after every F1 event.
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

User avatar
Zynerji
110
Joined: 27 Jan 2016, 16:14

Re: 2017-2020 Aerodynamic Technical Regulations

Post

jjn9128 wrote:
27 Dec 2020, 13:28
hollus wrote:
27 Dec 2020, 02:03
Same reason they were banned,I guess. If they break their seal, the downforce disappears too suddenly. So safety.
Also, according to Dernie and Murray(?), they scuffed/broke up the track surface. Promoters wouldn't want to have to resurface after every F1 event.

I've often thought what modern skirts could look like, and I just keep coming back to that clear thin plastic that "everything" seems to come packaged in, folded like an accordion for movement and conformance. Then some double sided foam tape to adhere to the floor edge, and Bob's your uncle! 😂😂

Jolle
Jolle
133
Joined: 29 Jan 2014, 22:58
Location: Dordrecht

Re: 2017-2020 Aerodynamic Technical Regulations

Post

ENGINE TUNER wrote:
26 Dec 2020, 16:40
Back on topic, does anyone know why side skits weren't adopted for the new aero regs? Wouldn't they provide more downforce and cut down on turbulence, especially in traffic?
They make a slight return at the rear wheels, to seal off the rear diffuser and tidy up the rear wheel turbulence.

But like others say, they are potential very dangerous. A small piece missing due to a turn one touch, and will have a very dangerous turn two pileup

mzso
mzso
65
Joined: 05 Apr 2014, 14:52

Re: 2017-2020 Aerodynamic Technical Regulations

Post

Just_a_fan wrote:
06 Dec 2020, 20:49
Ferrari were burning oil you know.
Their car was smoking like crazy...

mzso
mzso
65
Joined: 05 Apr 2014, 14:52

Re: 2017-2020 Aerodynamic Technical Regulations

Post

ENGINE TUNER wrote:
26 Dec 2020, 16:40
Back on topic, does anyone know why side skits weren't adopted for the new aero regs? Wouldn't they provide more downforce and cut down on turbulence, especially in traffic?
They suck in a dangerous way.
ENGINE TUNER wrote:
27 Dec 2020, 06:25
Understandable, but isn't that also the case for the front wings? I wonder if they were considered, a rubber skirt like on a hovercraft would get the job done.
Breaking a front wing is harder than going over a hump or a kerb awkwardly so the seal to the ground would fail, which would take away a good chunk of downforce immediately.

Though I don't get why they didn't make the formula more underbody downforce focused. With minimal to no back wing. And (since they claim that it's necessary) only leaving the parts of the front wing that guides the air so that it would create the least turbulence behind.

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: 2017-2020 Aerodynamic Technical Regulations

Post

mzso wrote:
27 Dec 2020, 21:17
Though I don't get why they didn't make the formula more underbody downforce focused. With minimal to no back wing. And (since they claim that it's necessary) only leaving the parts of the front wing that guides the air so that it would create the least turbulence behind.
I can point you to my PhD thesis if you wanna know why they have/need a big rear wing :lol: :lol:

[url=https://www.formula1.com/en/latest/arti ... LN8Ox.html]Alternatively there's this article on the official F1 website with quotes from Pat Symonds about why it's necessary./url]
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

mzso
mzso
65
Joined: 05 Apr 2014, 14:52

Re: 2017-2020 Aerodynamic Technical Regulations

Post

jjn9128 wrote:
27 Dec 2020, 21:49
mzso wrote:
27 Dec 2020, 21:17
Though I don't get why they didn't make the formula more underbody downforce focused. With minimal to no back wing. And (since they claim that it's necessary) only leaving the parts of the front wing that guides the air so that it would create the least turbulence behind.
I can point you to my PhD thesis if you wanna know why they have/need a big rear wing :lol: :lol:

[url=https://www.formula1.com/en/latest/arti ... LN8Ox.html]Alternatively there's this article on the official F1 website with quotes from Pat Symonds about why it's necessary./url]
There's no reason a trailing edge of a wingless car's body/diffuser couldn't do the same.
Last edited by mzso on 02 Jan 2021, 00:25, edited 1 time in total.

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: 2017-2020 Aerodynamic Technical Regulations

Post

mzso wrote:
01 Jan 2021, 15:47
There's no reason a trailing edge of a wingless cars body/diffuser couldn't do the same.
I disagree. The closer into ground effect a wing/downforce producing body is the more it's circulation is cancelled - which means wake upwash is reduced. The result is that the wake just hangs around - DynamicFlow/Miqdad Ali did an article in Racecar Engineering back in 2017 (?) with a "ground effect" car with tiny wings and showed this in action. The rear wing tip vortex pair is also really important in "cleaning" up the wake.
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

User avatar
djos
113
Joined: 19 May 2006, 06:09
Location: Melbourne, Australia

Re: 2017-2020 Aerodynamic Technical Regulations

Post

ENGINE TUNER wrote:
26 Dec 2020, 16:40
Back on topic, does anyone know why side skits weren't adopted for the new aero regs? Wouldn't they provide more downforce and cut down on turbulence, especially in traffic?
They do have side skirts, they just don’t extend below the “boat keel” and are fixed.

Image
"In downforce we trust"

mzso
mzso
65
Joined: 05 Apr 2014, 14:52

Re: 2017-2020 Aerodynamic Technical Regulations

Post

jjn9128 wrote:
01 Jan 2021, 17:19
I disagree. The closer into ground effect a wing/downforce producing body is the more it's circulation is cancelled - which means wake upwash is reduced. The result is that the wake just hangs around
What do you mean by circulation in this use?
I just fail to see a difference. If you want air to go up you just shape the trailing edge to do that without making a separate windcatcher (rear wing). You could add horizontal elements to the diffuser if it's really necessary. (Though I wouldn't expect it would be if a plain wing is enough)
jjn9128 wrote:
01 Jan 2021, 17:19
The rear wing tip vortex pair is also really important in "cleaning" up the wake.
Not sure what to think about the vortices. They do anything they can to decrease them otherwise they wouldn't have endplates.
jjn9128 wrote:
01 Jan 2021, 17:19
DynamicFlow/Miqdad Ali did an article in Racecar Engineering back in 2017 (?) with a "ground effect" car with tiny wings and showed this in action.
Is this available somewhere?

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: 2017-2020 Aerodynamic Technical Regulations

Post

mzso wrote:
02 Jan 2021, 12:44
What do you mean by circulation in this use?
I just fail to see a difference. If you want air to go up you just shape the trailing edge to do that without making a separate windcatcher (rear wing). You could add horizontal elements to the diffuser if it's really necessary. (Though I wouldn't expect it would be if a plain wing is enough)
Circulation in this case refers to the bound vortex - part of lifting line theory, the air doesn't physically circulate around a lifting body, but without it there's no flow direction change in the mathematical model. In this case think of it in terms of Newtons 3rd law (a bit of a simplification) - the ground is exerting force on the car so the car is exerting force on the ground - there's a mirror image under the ground and the direction change of the flow, upwash in the wake, is cancelled.

mzso wrote:
02 Jan 2021, 12:44
Not sure what to think about the vortices. They do anything they can to decrease them otherwise they wouldn't have endplates.
The rear wing tip vortices are really powerful, the wings aspect ratio is pretty square so any treatment around the tips is only reducing the vortex strength by a few percent max. Endplates increase downforce too - the constraint of flow at the tip increases the effective span of the wing - making the spanwise lift distribution more rectangular than elliptical.

mzso wrote:
02 Jan 2021, 12:44
Is this available somewhere?
Other than direct from RCE not sure. This was posted from it here on p102 of this thread
Image
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

User avatar
Blackout
1566
Joined: 09 Feb 2010, 04:12

Re: 2017-2020 Aerodynamic Technical Regulations

Post

Got a question about the rear bodywork holes that let the wishbones pass, are they detrimental to performance? did teams try to close them with flat rubber joints for example? :P
Image

PhillipM
PhillipM
386
Joined: 16 May 2011, 15:18
Location: Over the road from Boothy...

Re: 2017-2020 Aerodynamic Technical Regulations

Post

Mostly just dump air of out them where the air is already dirty anyway