Williams FW40 Mercedes

[LookBackTime]

[LookBackTime]

Craig Scarborough‏ @ScarbsTech

[LookBackTime]

[LookBackTime]

APP Tech rims (same as Torro Rosso)!

APP Tech forging process:
http://www.apptech-forgedwheels.com/pro ... ng-process

"
The confidential nature of motorsport design prohibits the publication of specific details. However, needless to say the approach can differ somewhat when compared to road wheels, and as such a high level of experience is needed to comply with the demanding load cases applied to the wheel, especially when working with Magnesium.
Additionally, production from Magnesium requires strict materials control to correctly process the material and produce a durable end product.
"

[LookBackTime]

Matthew Somerfield‏
@SomersF1
"New front wing for @WilliamsRacing, wide canard behind the main cascade & 2 triangular vanes off endplate edge !"

[F1NAC]

Matthew Somerfield‏
@SomersF1
New front wing for @WilliamsRacing, wide canard behind the main cascade & 2 triangular vanes off endplate edge !

https://pbs.twimg.com/media/C7h0nNUWkAE7JKB.jpg:large

Looks just like the one they used during testing. Maybe those triangles are a bit different in shape

[LookBackTime]

R deflector is different from Barcelona testing!
The other changes mentioned by Matthew Somerfield‏ looks the same as the old ones. At least for me

[F1NAC]

R is slightly different (if any). But yes, I was referring on photo above my previous post which is basically same as in testing

[LookBackTime]

https://twitter.com/ScarbsTech/status/8 ... 5504082946

[LookBackTime]

[LookBackTime]

FW detail: you can see a black coating has been applied!

[ScrewCaptain27]

[PhillipM]

It's a shadow!

[turbof1]

https://twitter.com/ScarbsTech/status/8 ... 5504082946

https://pbs.twimg.com/media/C7kf7ZbVQAAYj1a.jpg

https://pbs.twimg.com/media/C7kf8g4VsAAWSAF.jpg

Damn, I was convinced this wasn't a cooling outlet. Who was the one who correctly stated it? You can cash in an apology.

[PhillipM]

The tea tray area is more and more interesting, the flow at the side of the centre duct/stay seems to be channeled through some holes/vents under the floor.