There is 1 less vane of the floor edgeorganic wrote: ↑25 Feb 2025, 19:36I genuinely can't spot anything different apart from the beamwing and the halo winglet
https://i.imgur.com/oUgwA5k.jpeg
I count the same number. The furthest rearwards one on the 2025 car is just not as visible in that photomarcel171281 wrote: ↑25 Feb 2025, 19:43There is 1 less vane of the floor edgeorganic wrote: ↑25 Feb 2025, 19:36I genuinely can't spot anything different apart from the beamwing and the halo winglet
https://i.imgur.com/oUgwA5k.jpeg![]()
Look were it is relative to the honda logo. Either the bodywork is different, or the suspension is different.Cs98 wrote: ↑25 Feb 2025, 19:25I don't see any difference. It's just camera angle. The car we've been shown is identical to the RB20 visually.
Do you think there was a major mistake made during R&D last year for RB20 but it was specific to one part of the car that is underneath and couldn't be changed after a crash test and they are testing it out now with the RB20 to see if the changes they have made now correlate to what they wanted to achieve early last year? Once the correlation is proved by the tests over these three days, then further development can go ahead? Presumably, further development has been done but is based on the corrected data..organic wrote: ↑25 Feb 2025, 19:36I genuinely can't spot anything different apart from the beamwing and the halo winglet
https://i.imgur.com/oUgwA5k.jpeg
You are right. The inlets behind the driver head are gone.marcel171281 wrote: ↑25 Feb 2025, 19:56Rear body panels are 100% different. Look at the panel gaps near the 'knee' of the bull.
Yep, also look at the 'E'. That surface is more flat then RB20. Looks like that internal ducting is gone.Henk_v wrote: ↑25 Feb 2025, 20:13You are right. The inlets behind the driver head are gone.marcel171281 wrote: ↑25 Feb 2025, 19:56Rear body panels are 100% different. Look at the panel gaps near the 'knee' of the bull.
Great eye marcel! So this is probably the launch spec given this must've all been manufactured freshlymarcel171281 wrote: ↑25 Feb 2025, 20:20Yep, also look at the 'E'. That surface is more flat then RB20. Looks like that internal ducting is gone.Henk_v wrote: ↑25 Feb 2025, 20:13You are right. The inlets behind the driver head are gone.marcel171281 wrote: ↑25 Feb 2025, 19:56Rear body panels are 100% different. Look at the panel gaps near the 'knee' of the bull.
Maybe that front wishbone is attaching slightly higher on the gearbox, but really discrete.marcel171281 wrote: ↑25 Feb 2025, 19:47Look were it is relative to the honda logo. Either the bodywork is different, or the suspension is different.