Innovo 2012 F1 Car - Tozza Mazza and JordanGP

[jordangp]

i know what you mean. Thanks

What height/depth (how thick) do you do the floor? 10mm?

Mine is predominantly 5mm. If you look at the floor thickness, at the very outside edges, you can see it it much thinner than 1cm.

[jordangp]

Twitter
via @InnovoF1
Here's a look at our Turkish GP spec car



Revised:
Rear Wing & Endplates
Beam wing
Floor
Exhausts & Sidepods

EDIT:
Practice Results: Heidfeld P3 Kubica P5
Qualifying Results: Heidfeld P2 Kubica P3

[CottrellGP]

I like your rear end, big man

[jordangp]

Everyone loves my rear end

Doesn't seem to get the results though. Worst results of the year this weekend.

[CottrellGP]

This is F1 Technical not some porn site Innovo!

[Monster_Energy_F1]

Well, you can't really help the retirement, and 4th place isn't too bad. Wait for the race report to see why this happened!

[Markus]

I would like to start building my own F1 car in Google sketchup. I just wanted to ask if you started out with some sort of a starter pack or did you guys build everything from scratch?
BTW amazing work on your car.

[N12ck]

I would like to start building my own F1 car in Google sketchup. I just wanted to ask if you started out with some sort of a starter pack or did you guys build everything from scratch?
BTW amazing work on your car.

I personally started from scratch, as I built the car before I seen the starter pack,

[Markus]

I would like to start building my own F1 car in Google sketchup. I just wanted to ask if you started out with some sort of a starter pack or did you guys build everything from scratch?
BTW amazing work on your car.

I personally started from scratch, as I built the car before I seen the starter pack,

Do you know where you can get that starter pack?

[N12ck]

I would like to start building my own F1 car in Google sketchup. I just wanted to ask if you started out with some sort of a starter pack or did you guys build everything from scratch?
BTW amazing work on your car.

I personally started from scratch, as I built the car before I seen the starter pack,

Do you know where you can get that starter pack?

well I didn't use it so I don't really know where to get it from,,, ask Jordan GP

[jordangp]

You will be unable to obtain a starter pack unless you are a member of Formula Sketch, or a pending member for 2013.

[etsmc]

You will be unable to obtain a starter pack unless you are a member of Formula Sketch, or a pending member for 2013.

And even thats hard enough

[jordangp]

You will be unable to obtain a starter pack unless you are a member of Formula Sketch, or a pending member for 2013.

And even thats hard enough

How so? Just ask for it

[Markus]

You will be unable to obtain a starter pack unless you are a member of Formula Sketch, or a pending member for 2013.

And even thats hard enough

How so? Just ask for it

Well the site is down so it´s quite hard to find contact details.

[jordangp]

Well the site is down so it´s quite hard to find contact details.

Yes, but for members of Formula Sketch, it isn't an issue, which was what I was stating.

Hopefully they'll get the site up and running again soon though.