Sorry guys, don't kick my ass to hard
Nick sent me a great quality image, however I must say I did muck it up. As I said before sponsors still need to be worked out but again all down to me. Here is the revamped version:
Monster_Energy_F1 wrote:Anybody interested in some diffuser pics?
yes!! i am
And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.
Ayrton Senna
great!! could you give me the full list of results i cant find them
And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.
Ayrton Senna
wesley123 wrote:Maybe if they show a picture of them using CFD on the car that will help? formulasketch you can use my car to present a picture of so you dont have to not do it by saying it is unfair towards the user. You can show one of my car, you have my full permission to do so
wesley123 wrote:Maybe if they show a picture of them using CFD on the car that will help? formulasketch you can use my car to present a picture of so you dont have to not do it by saying it is unfair towards the user. You can show one of my car, you have my full permission to do so
Great idea expect it within the week probably tomorrow
lets see some details what is your mesh size?
How many iterations per car?
How far are you off from convergence?
Are you simulating rotating tires and a moving road or just setting the ground plane to zero friction?
As Nick said it takes a few days on what I assume was a pretty coarse mesh. With the number of winglets multi plane wings on these cars you could spend a week getting a good mesh.
yes Flynfrog, you are right, but mine is done on a fairly powerful computer compared to a regular computer so I can get finer meshes, but the problem is with sketchup, it gets to a stage where you can make your mesh finer but it doesnt make any difference because of the fasitization on sketchup models themselves,
I have to say the thing I expect to happen are 1 of 2 things: photoshopped image, or he will download the program,find out how to export it from sketchup,start to run a simulation on it, after spending all day working out how to use it, printscreen a picture of it starting to run, and then claim he has ran CFD on it,
Meanwhile look through the thread and see if anything interests you. Look at the later pages chiefly.
