Please discuss here all your remarks and pose your questions about all racing series, except Formula One. Both technical and other questions about GP2, Touring cars, IRL, LMS, ...
Interesting interview with Laurent Mekies, of the FIA saftey group about the Indycar deflector/screen/shield.
However, Mekies admits the windscreen will "not necessarily" adhere to the same safety standards as the Halo as a different solution could also provide a different type of protection.
"One of the key aspects is to pick a load case – what are you trying to protect against? There is no absolute truth with that; nobody is wrong and nobody is right. You choose what you try to protect against, and after that you have to accept if something more than that happens it won't help, or not as much as is needed.
"We'll catch up to see where the items they tried puts them in terms of protection level. You might remember that we had ourselves scanned different protection levels. The shield itself we tried at Silverstone last year had a slightly reduced protection level, so it's a matter of finding a good compromise.
"It's very good that such an important player as IndyCar is getting very involved in this, and as I said we are working very closely with them."
I imagine a very simple titanium bezel around the top loop of the indy screen, and fastened at the back end of the screen would add an immense amount of strength to this design. Something like a 10mm piece of channel stock that fits snugly would redirect an enormous amount of impact energy around the driver.
I'm sure the right people are moving this forward as we type these speculations.
I imagine a very simple titanium bezel around the top loop of the indy screen, and fastened at the back end of the screen would add an immense amount of strength to this design. Something like a 10mm piece of channel stock that fits snugly would redirect an enormous amount of impact energy around the driver.
I'm sure the right people are moving this forward as we type these speculations.
Such a U-channel seating at the base of the screen would likely be a more useful addition, as the calculated
flex capability of the resilient 'plastic' may be compromised by such a metallic ad-hoc/add-on, up top, perhaps.
"Well, we knocked the bastard off!"
Ed Hilary on being 1st to top Mt Everest,
(& 1st to do a surface traverse across Antarctica,
in good Kiwi style - riding a Massey Ferguson farm
tractor - with a few extemporised mod's to hack the task).
A frame for the window to be held within is an ad-hoc addition?
One added to the top as an afterthought, & sans recalculation of dynamics, yeah, for sure..
"Well, we knocked the bastard off!"
Ed Hilary on being 1st to top Mt Everest,
(& 1st to do a surface traverse across Antarctica,
in good Kiwi style - riding a Massey Ferguson farm
tractor - with a few extemporised mod's to hack the task).
A frame for the window to be held within is an ad-hoc addition?
One added to the top as an afterthought, & sans recalculation of dynamics, yeah, for sure..
And for added strength a bar between the top and the chassis... like... a halo, covered with a screen. And when rubber and dirt is a problem, take away the screen.
A frame for the window to be held within is an ad-hoc addition?
One added to the top as an afterthought, & sans recalculation of dynamics, yeah, for sure..
And for added strength a bar between the top and the chassis... like... a halo, covered with a screen. And when rubber and dirt is a problem, take away the screen.
Or clean the screen, but do not add any needless metal framing - that really does block the driver's view..
"Well, we knocked the bastard off!"
Ed Hilary on being 1st to top Mt Everest,
(& 1st to do a surface traverse across Antarctica,
in good Kiwi style - riding a Massey Ferguson farm
tractor - with a few extemporised mod's to hack the task).
Or clean the screen, but do not add any needless metal framing - that really does block the driver's view..
????
Why not just have tear-offs?
.
Back to Adrian Newey's book: Their research showed the drivers only look straight ahead to the next corner and cross angle to the apex.
Is there something I'm missing with all this talk of cleaning? Seems straight forward and un complex.
Last edited by strad on 15 Feb 2018, 23:25, edited 1 time in total.
To achieve anything, you must be prepared to dabble on the boundary of disaster.”
Sir Stirling Moss