Each engine maker had an aero kit specific to the make: Honda had a kit developed by Wirth and Chevy had their kit (don't remember who developed it). The Chevy kit was arguably the better of the two. IndyCar then reverted back to a standard kit for all teams.mzso wrote: ↑08 Jan 2019, 13:02It seems mostly off-topic, since they struggled mostly because of "Manufacturer Aerokits", whatever that was.restless wrote: ↑08 Jan 2019, 08:20slightly offtopic, but interesting story how Honda engine was not competitive enough in Indicar, and needed 6 years to turn the tide
https://motorsports.vtec.net/blog/227/l ... car-title/
Sounds like the same story every year. Anything specific to note?
Not according to the article. The article states that Honda NOW wants to fix these problems themselves, which suggest that they haven't been fixed. I suspect that someone within AVL leaked the information to Bild, which would also explain why other outlets haven't been reporting about the situation.
I was talking about the title not the caption.gruntguru wrote: ↑08 Jan 2019, 10:11The "Lambda = 1" is in brackets immediately after the words "Baseline SI".PlatinumZealot wrote: ↑08 Jan 2019, 05:17Check the graph (the Nox one at lambda =1) and see the inconsistency with the title of it.
The TJI DOES NOT have a 99% reduction in NOx vesrsus normal spark ignition at lamda =1 as the title of the graph suggests. If we cross check it with the second graph we see that this actually "percentage of."
Even at other similar lamda the ex-engine TJI NOx can be considered simlar to normal spark based on other papers too.
The caption below says ". . . engine out NOx emission comparisons of jet ignition and stoichiometric spark ignition combustion"
Honda saying they "now" want to fix vibration problems on their own could mean it's not fixed or it could mean it's already fixed and they just decided AVL wasn't doing a good job helping them fix it. If you read some of the 2018 tech summary on page 3 it goes into some detail about why they have a hard time predicting vibrations until they get to the track. Spoiler: it's because the drive shaft on the chassis dyno (AVL) is attached to a motor and not a tire and doesn't accurately replicate what vibrations will be like on the track.RonDennis wrote: ↑08 Jan 2019, 14:59Not according to the article. The article states that Honda NOW wants to fix these problems themselves, which suggest that they haven't been fixed. I suspect that someone within AVL leaked the information to Bild, which would also explain why other outlets haven't been reporting about the situation.
You hit on a very good point, no matter how much simulation and testing is performed you simply cannot replace track time (augment -> yes, replace -> no). It seems like every year you hear of a team that has 'correlation issues' with some off-track simulation system.
Part of on track development is in creating these predictive algorithms. The holy grail is using the track to validate the designs and not the other way around. In a way teams are forced to work this way as actual track time is so limited. Simulation technology is something the general public knows nothing about, yet is a huge driver of car performance.subcritical71 wrote: ↑08 Jan 2019, 16:00You hit on a very good point, no matter how much simulation and testing is performed you simply cannot replace track time (augment -> yes, replace -> no). It seems like every year you hear of a team that has 'correlation issues' with some off-track simulation system.
Good. Now that I have bludgeoned you into submission - you are probably right - that title could have been better worded.
TheJudge features a translation. Very interesting stuff:dren wrote: ↑04 Jan 2019, 18:40Japanese only. Will have to have it translated.anthonyfa18 wrote: ↑04 Jan 2019, 18:38where is this from and where can i buy it and one have it english sub toodren wrote: ↑27 Dec 2018, 14:17I bit the bullet and purchased a copy:
https://i.ibb.co/Bs7G7bz/1.jpg
https://i.ibb.co/r7D6S67/2.jpg
https://i.ibb.co/nLwFRnY/3.jpg
https://i.ibb.co/nf3xjPv/4.jpg
https://i.ibb.co/42yNFT7/4-1.jpg
https://i.ibb.co/wYfn0CB/5.jpg
https://i.ibb.co/LRMt5SL/5-1.jpg
https://i.ibb.co/1vjJqmX/6.jpg
https://i.ibb.co/ss0f6G3/7.jpg
https://i.ibb.co/zr4rG5N/8.jpg
Yes good info there. Good to have the "vibration on upshift" clarified. It seems its a torsional vibration issue excited by unusual combustion pressure signatures. It was only occurring on upshift where engine revs drop significantly in a few milliseconds thanks to seamless shifting.lio007 wrote: ↑09 Jan 2019, 06:57TheJudge features a translation. Very interesting stuff:
https://thejudge13.com/2019/01/08/secre ... proved-hp/
I think Mercedes have had some problems with that as well. I cannot recall when or where I read it now but it does ring a bell. Somewhere
Honda said they designed in a certain amount of allowance for future power upgrades for vibration but ate all that allotment up with the spec 3 update.