2019 Aerodynamic Changes & Solutions

Here are our CFD links and discussions about aerodynamics, suspension, driver safety and tyres. Please stick to F1 on this forum.
Maritimer
Maritimer
19
Joined: 06 Sep 2017, 21:45
Location: Canada

Re: 2019 Aerodynamic Changes & Solutions

Post

strad wrote:
29 Jan 2019, 21:04
This thread has helped me understand a lot but there is still something I don't understand.
Yes the following car finds a lot of disturbed air as it comes up behind another. But why can't it push thru that disturbed air and enter a calm space close behind the leading car.
Like drafting in other series.
That calm air as you put it has momentum and is moving in the same direction as the vehicles. Good in a straight line for catching someone, bad in the corners when the car cant work the air as hard and thus makes less downforce. The cars are designed in simulations by themselves, optimized to run in clean, still air. The air getting dragged with the car ahead will have a lower dV relative to the following car, difference in velocity over/under a wing being what generates lift due to the pressure differential it causes.

Turbulence is an issue, but even the non turbulent air behind a leading car causes issues.

User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: 2019 Aerodynamic Changes & Solutions

Post

Maritimer wrote:
30 Jan 2019, 06:34
strad wrote:
29 Jan 2019, 21:04
This thread has helped me understand a lot but there is still something I don't understand.
Yes the following car finds a lot of disturbed air as it comes up behind another. But why can't it push thru that disturbed air and enter a calm space close behind the leading car.
Like drafting in other series.
That calm air as you put it has momentum and is moving in the same direction as the vehicles. Good in a straight line for catching someone, bad in the corners when the car cant work the air as hard and thus makes less downforce. The cars are designed in simulations by themselves, optimized to run in clean, still air. The air getting dragged with the car ahead will have a lower dV relative to the following car, difference in velocity over/under a wing being what generates lift due to the pressure differential it causes.

Turbulence is an issue, but even the non turbulent air behind a leading car causes issues.
Air has momentum in yaw as well, the aero on the car is more disturbing to a trailing car on the outside of the curve than the inside.
Saishū kōnā

User avatar
strad
117
Joined: 02 Jan 2010, 01:57

Re: 2019 Aerodynamic Changes & Solutions

Post

Thanks for the help. Still I would think that on the straights they could get close enough in the draft to be able to overtake. Since most overtaking in F1 takes place at the end of a straight before the next corner.
I do understand what you say about the bubble and the close following rear car helping the lead car.
To achieve anything, you must be prepared to dabble on the boundary of disaster.”
Sir Stirling Moss

Just_a_fan
Just_a_fan
593
Joined: 31 Jan 2010, 20:37

Re: 2019 Aerodynamic Changes & Solutions

Post

The problem is that in order to benefit from the draught/tow, the following car needs to close enough in the preceding corner. Currently, by the time the following car has got close enough for the draught/tow to be felt, the straight has ended. China has shown that F1 cars can use this process if the straight is long enough. What the rules are trying to do is close the cars up in the preceding corner. Then the straights might be long enough.
If you are more fortunate than others, build a larger table not a taller fence.

User avatar
strad
117
Joined: 02 Jan 2010, 01:57

Re: 2019 Aerodynamic Changes & Solutions

Post

Got it #-o ...Thanks
To achieve anything, you must be prepared to dabble on the boundary of disaster.”
Sir Stirling Moss

User avatar
turbof1
Moderator
Joined: 19 Jul 2012, 21:36
Location: MountDoom CFD Matrix

Re: 2019 Aerodynamic Changes & Solutions

Post

Both a look back on pre-2019 front wings and deep analysis of the new front wing regulations:
https://www.f1technical.net/news/21935
#AeroFrodo

User avatar
Zynerji
110
Joined: 27 Jan 2016, 16:14

Re: 2019 Aerodynamic Changes & Solutions

Post

Does anyone think these changes are going to make DRS absurdly effective?

We may see a race where qualifying 2nd might be the best option if the zone effect is outrageous.

I expect that after race 1, all DRS zones are shortened by a large amount because of the outcry. I mean, Australia is not a passing track by nature. If there are 35 on track passes, the teams/fans/media are going to whine about the DRS Lottery.

User avatar
Zynerji
110
Joined: 27 Jan 2016, 16:14

Re: 2019 Aerodynamic Changes & Solutions

Post

turbof1 wrote:
06 Feb 2019, 13:46
Both a look back on pre-2019 front wings and deep analysis of the new front wing regulations:
https://www.f1technical.net/news/21935
Great article! Thank you for the effort!

User avatar
Blackout
1566
Joined: 09 Feb 2010, 04:12

Re: 2019 Aerodynamic Changes & Solutions

Post

Are these solutions still legal ? (I mean the yellow and purple vanes, not necessarily the STR/Merc elevated top whisbones) they're interesting for tire wake management and I wonder if more teams will copy them... if the 2019 rules permit it :?:
https://imgr2.auto-motor-und-sport.de/S ... 162384.jpg
Image

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: 2019 Aerodynamic Changes & Solutions

Post

Blackout wrote:
10 Feb 2019, 14:41
Are these solutions still legal ? (I mean the yellow and purple vanes, not necessarily the STR/Merc elevated top whisbones) they're interesting for tire wake management and I wonder if more teams will copy them... if the 2019 rules permit it :?:
I'm not sure either were technically legal last year... the yellow vane certainly appears to be outside the "front brake air duct" volume in that image - from the top of the air duct the blue one looks to be as well. I imagine they can/will keep the blue one because they can argue it's a suspension element not a part of the brake duct. It may have to be more neutrally shaped though with more stringent radii checks. Haas haven't gone to that high wishbone design in their 2019 renders so presumable Ferrari aren't.
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

User avatar
FW17
169
Joined: 06 Jan 2010, 10:56

Re: 2019 Aerodynamic Changes & Solutions

Post

Wish there was a notch in the front end plate just for aesthetics

Image

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: 2019 Aerodynamic Changes & Solutions

Post

Blackout wrote:
10 Feb 2019, 14:41
Are these solutions still legal ? (I mean the yellow and purple vanes, not necessarily the STR/Merc elevated top whisbones) they're interesting for tire wake management and I wonder if more teams will copy them... if the 2019 rules permit it :?:
Toro Rosso seem to have dropped their upper wishbone - could be because they're using non-listed parts from Red Bull this year.
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

User avatar
Shakeman
33
Joined: 21 Mar 2011, 13:31
Location: UK

Re: 2019 Aerodynamic Changes & Solutions

Post

Shakeman wrote:
25 Jan 2019, 17:42


Would it be possible to move the vortex tunnel from the outside of the wings near the end plate to close to the nose of the car and aim the vortex at the front wheel wake to steer it outboard?

I think there's scope in the y250 area. After I posted I went onto YT and low and behold there was a Scarbs video discussing 2019 Front Wings in my recommended videos. Big Brother is definitely watching.

https://www.youtube.com/watch?v=DuY3-qn2tIs
Looks like Renault have done just that to get as much value out of the y250 area as possible.

User avatar
FW17
169
Joined: 06 Jan 2010, 10:56

Re: 2019 Aerodynamic Changes & Solutions

Post

Wonder if this edge vortex is possible with the current front wings

Image

User avatar
subcritical71
90
Joined: 17 Jul 2018, 20:04
Location: USA-Florida

Re: 2019 Aerodynamic Changes & Solutions

Post

Here comes the sinister side of my thinking... What would happen if the end plates happen to 'fall off' the car. Would that allow the teams scope to modify the elements so that an end plate-less front wing would perform better by inducing outwash?