![Image](https://media.wired.com/photos/5c9959688c79ea63995c9fc6/master/pass/Ferrari_P80_transpo_1.jpg)
![Image](https://st.automobilemag.com/uploads/sites/5/2019/03/Ferrari-P80-C-6.jpg)
![Image](https://cnet2.cbsistatic.com/img/0_AykvtZpQChQZTzTPgAUw5qk0w=/1600x900/2019/03/25/6456eae6-c5d5-44dd-b103-247d83c47269/ferrari-p80-c-14.jpg)
![Image](https://motorillustrated.com/wp-content/uploads/2019/03/Ferrari-P80-C-4903.jpg)
![Image](https://imagenes-cdn.autofacil.es/multimedia/fotos/2019/03/25/155274/ferrari-p80c-6_g.jpg)
The Ferrari P80/C Is a Two-in-One Track Car and Garage Beauty, and There's Only OneDiogoBrand wrote: ↑27 Mar 2019, 02:47What's the story behind it? What's it made for? Who is it made by?
To me it looks really cool, and my cfd eyes say it probably performs really well also.
It's not a step, there's a hole there I just guess you can't see on the CFD. Just like the front diffuser also have two holes for air to exit through.Just_a_fan wrote: ↑05 Apr 2019, 10:36I don't understand the underbody design. The rear diffuser has a forward-facing step just before the upsweep of the exit ramp.
Perhaps, but note the modeled-in faces are a warmer shade. There were sportscars in the 80s/90s that had expansion regions near the front axle--closed diffusers, whatever you might call them. Can't recall model names or numbers. There's still a venturi effect to be had using this method although with compromises.Holm86 wrote: ↑05 Apr 2019, 20:15It's not a step, there's a hole there I just guess you can't see on the CFD. Just like the front diffuser also have two holes for air to exit through.Just_a_fan wrote: ↑05 Apr 2019, 10:36I don't understand the underbody design. The rear diffuser has a forward-facing step just before the upsweep of the exit ramp.
I keep thinking it looks like a cross between a DeTomaso Pantera and the modern Ford GT (not the remake of the classic 60s car). It doesn't "feel" Ferrari to me for some reason. That's not to say I don't like it, however.
I don't see a hole.Holm86 wrote: ↑05 Apr 2019, 20:15It's not a step, there's a hole there I just guess you can't see on the CFD. Just like the front diffuser also have two holes for air to exit through.Just_a_fan wrote: ↑05 Apr 2019, 10:36I don't understand the underbody design. The rear diffuser has a forward-facing step just before the upsweep of the exit ramp.
Its difficult to see on the CAD model, but im very sure there is a slit, so the diffuser acts kind of like a doubble diffuser.Just_a_fan wrote: ↑10 Apr 2019, 10:07I don't see a hole.Holm86 wrote: ↑05 Apr 2019, 20:15It's not a step, there's a hole there I just guess you can't see on the CFD. Just like the front diffuser also have two holes for air to exit through.Just_a_fan wrote: ↑05 Apr 2019, 10:36I don't understand the underbody design. The rear diffuser has a forward-facing step just before the upsweep of the exit ramp.