In the analytics, the RB was going faster at the end of the straight to turn 1 than the MCS. on paper it looked like it wouldn't be the engine but just the breaking difference that allowed the RB to hit the breaks deeper into the breaking zone going into the corner.
Edit citing this:
https://the-race.com/formula-1/four-rea ... ng-defeat/
The accompanying data traces show that it was at least competitive with the Honda on power.
It’s a lower-rake car and that partly explains its higher speed through the trap at the end of the pit straight. But it’s also quicker out of Turn 3 onto the shorter back straight.
The fact that the Red Bull then overhauls it before the braking zone for Turn 4 despite its higher drag suggests there may be a difference in the deployment distribution between the two power units – but at the very least the Mercedes engine is in the ballpark and not the reason the car had been lagging to the Red Bull up until qualifying. This is consistent with Hamilton’s insistence that the deficit was in downforce.
So my question is this, How many tenths was the MCS's losing in laptop to the RB based on the breaking of Turn 1 alone? I mean in Qualifying and the race. I ask this because we saw MV breaking at the 50 metre boards which is about normal. And we saw over the weekend, the MCS would lock up and ruin its tyres trying to break in the normal zone of 50 metres – they started having to break just before the 100 metre boards instead, and as we saw, the RB flung past them. How many tenths is that worth?
I ask this because it would back up what MCS was suggesting; They mitigated the engine loss to the Honda by a fair bit, it might be on Par, though I don't think the Honda has lost its edge in altitude.
It also makes me think, without those issues in breaking, the MCS might have been closer by a couple tenths alone? bundle that with Hamilton not being happy with his set up, there was maybe a fair bit of pace locked away in the car. Perhaps the MCS has a ceiling of performance as high as the RB after all but is much more challenging to activate through set up because its sensitive to track layout and condition that bit more.