McLaren F1 successor

Breaking news, useful data or technical highlights or vehicles that are not meant to race. You can post commercial vehicle news or developments here.
Please post topics on racing variants in "other racing categories".
User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: McLaren F1 successor

Post

"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

pierrre
pierrre
56
Joined: 17 Apr 2019, 21:45
Location: a jungle somewhere

Re: McLaren F1 successor

Post

the engine on that t.50 is something else


User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: McLaren F1 successor

Post

"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: McLaren F1 successor

Post





"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

J.A.W.
J.A.W.
109
Joined: 01 Sep 2014, 05:10
Location: Altair IV.

Re: McLaren F1 successor

Post

Curious how Cosworth has their V12's 6 exhaust headers on each bank, grouped.

Cylinders 1-3-5 & 2-4-6 feed their individual pipes into a pair of collectors.

Unusual, since for packaging convenience, 1-2-3 & 4-5-6 is a typical set-up,
or if, when space allows, an equal-length triple grouping of 1-6, 2-4, 3-5.

Seems the Cosworth team has sought to more closely-group the firing impulses,
but in a way which allows a consecutive group-pulse from each tri-collector...
"Well, we knocked the bastard off!"

Ed Hilary on being 1st to top Mt Everest,
(& 1st to do a surface traverse across Antarctica,
in good Kiwi style - riding a Massey Ferguson farm
tractor - with a few extemporised mod's to hack the task).

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: McLaren F1 successor

Post

"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

Cold Fussion
Cold Fussion
93
Joined: 19 Dec 2010, 04:51

Re: McLaren F1 successor

Post

Presumably after the suction point, the diffuser angle can no longer exceed the standard critical angle?

User avatar
Stu
Moderator
Joined: 02 Nov 2019, 10:05
Location: Norfolk, UK

Re: McLaren F1 successor

Post

Cold Fussion wrote:
04 Jan 2021, 12:11
Presumably after the suction point, the diffuser angle can no longer exceed the standard critical angle?
It doesn’t need to as the diffuser fills the space, it can be horizontal. It becomes all about the volume of the diffuser space.

After watching I was left with two questions...

1) What effect would running the fan backwards be?
Would it be beneficial for drag reduction?

2) How exactly are they making this happen on F1 cars (as the diffusers on most appear to be maximising the legal space).
I can think of a few ways, but not sure how legal any of them would be!!
Perspective - Understanding that sometimes the truths we cling to depend greatly on our own point of view.

User avatar
jjn9128
778
Joined: 02 May 2017, 23:53

Re: McLaren F1 successor

Post

Does anyone have pictures of the actual diffuser? I'm assuming it's like one or two perforated sections similar to the McLaren F1.
#aerogandalf
"There is one big friend. It is downforce. And once you have this it’s a big mate and it’s helping a lot." Robert Kubica

User avatar
Morteza
2308
Joined: 10 Feb 2010, 18:23
Location: Bushehr, Iran

Re: McLaren F1 successor

Post

"A fool thinks himself to be wise, but a wise man knows himself to be a fool."~William Shakespeare

Just_a_fan
Just_a_fan
593
Joined: 31 Jan 2010, 20:37

Re: McLaren F1 successor

Post

I'm looking forward to seeing this car hit the road. I think the comparison tests that the journos will undoubtedly do will be interesting. Chris Harris driving this back to back with the usual suspects from Ferrari, Porsche and McLaren should be a great watch. =D>
If you are more fortunate than others, build a larger table not a taller fence.

the EDGE
the EDGE
67
Joined: 13 Feb 2012, 18:31
Location: Bedfordshire ENGLAND

Re: McLaren F1 successor

Post

Just_a_fan wrote:
18 Feb 2021, 10:28
I'm looking forward to seeing this car hit the road. I think the comparison tests that the journos will undoubtedly do will be interesting. Chris Harris driving this back to back with the usual suspects from Ferrari, Porsche and McLaren should be a great watch. =D>
It will certainly be interesting to see how this tech transfers to the real world

From what I understand the fans don’t increase the downforce per se, like the F1 BT46 did, but works to remove the boundary layer from the diffuser to increase low-speed downforce giving the effect a much wider working range, or operating in reverse to reduce high-speed drag

A very interesting concept indeed, given other downforce based road cars require quite a bit of speed to notice the full effect of the downforce

Just_a_fan
Just_a_fan
593
Joined: 31 Jan 2010, 20:37

Re: McLaren F1 successor

Post

the EDGE wrote:
18 Feb 2021, 10:44
From what I understand the fans don’t increase the downforce per se, like the F1 BT46 did, but works to remove the boundary layer from the diffuser to increase low-speed downforce giving the effect a much wider working range, or operating in reverse to reduce high-speed drag
Murray stated that switching to "high downforce mode" instantly gives a 50% increase in downforce. Which is quite impressive. As you say, it doesn't work like the race car did because you can't seal a road car to the road. But the fan pulls air from the stagnation zone in the diffuser and just makes it work better. But there's also a low drag mode that gives a 12.5% reduction in drag. Now that's a real world application that would pay dividends across the board. Imagine if we could reduce the drag of every car on the road today by 12.5%. That would be a big saving in fuel and thus emissions.

I think it's a great piece of engineering that should give a nudge to other manufacturers to do properly clever stuff.
If you are more fortunate than others, build a larger table not a taller fence.

the EDGE
the EDGE
67
Joined: 13 Feb 2012, 18:31
Location: Bedfordshire ENGLAND

Re: McLaren F1 successor

Post

Just_a_fan wrote:
18 Feb 2021, 11:58
the EDGE wrote:
18 Feb 2021, 10:44
From what I understand the fans don’t increase the downforce per se, like the F1 BT46 did, but works to remove the boundary layer from the diffuser to increase low-speed downforce giving the effect a much wider working range, or operating in reverse to reduce high-speed drag
Murray stated that switching to "high downforce mode" instantly gives a 50% increase in downforce. Which is quite impressive. As you say, it doesn't work like the race car did because you can't seal a road car to the road. But the fan pulls air from the stagnation zone in the diffuser and just makes it work better. But there's also a low drag mode that gives a 12.5% reduction in drag. Now that's a real world application that would pay dividends across the board. Imagine if we could reduce the drag of every car on the road today by 12.5%. That would be a big saving in fuel and thus emissions.

I think it's a great piece of engineering that should give a nudge to other manufacturers to do properly clever stuff.
Yes but you don’t get air stagnation and separation at high speeds, only low speeds

The exhaust blow diffusers added energy to the stream to increase its effectiveness where this effectively removes air from the stream helping stay attached so increases effectiveness

Just_a_fan
Just_a_fan
593
Joined: 31 Jan 2010, 20:37

Re: McLaren F1 successor

Post

the EDGE wrote:
18 Feb 2021, 12:14
Just_a_fan wrote:
18 Feb 2021, 11:58
the EDGE wrote:
18 Feb 2021, 10:44
From what I understand the fans don’t increase the downforce per se, like the F1 BT46 did, but works to remove the boundary layer from the diffuser to increase low-speed downforce giving the effect a much wider working range, or operating in reverse to reduce high-speed drag
Murray stated that switching to "high downforce mode" instantly gives a 50% increase in downforce. Which is quite impressive. As you say, it doesn't work like the race car did because you can't seal a road car to the road. But the fan pulls air from the stagnation zone in the diffuser and just makes it work better. But there's also a low drag mode that gives a 12.5% reduction in drag. Now that's a real world application that would pay dividends across the board. Imagine if we could reduce the drag of every car on the road today by 12.5%. That would be a big saving in fuel and thus emissions.

I think it's a great piece of engineering that should give a nudge to other manufacturers to do properly clever stuff.
Yes but you don’t get air stagnation and separation at high speeds, only low speeds

The exhaust blow diffusers added energy to the stream to increase its effectiveness where this effectively removes air from the stream helping stay attached so increases effectiveness
No, on a heavily reflex diffuser such as fitted to the T.50, you get separation at all speeds because the change in direction is too big for the air to follow it naturally. The fan works against that to remove the dirty air in the reflex section and make the diffuser work better at all speeds. There's a nice little video earlier in the thread where Murray shows this on a white board.
If you are more fortunate than others, build a larger table not a taller fence.