REGI U.S., INC. / REG TECHNOLOGIES INC. ANNOUNCE RADMAX® ENGINE TO USE 20% LESS FUEL THAN EXISTING GASOLINE ENGINE
For Immediate Release: June 23, 2008. Vancouver, BC - REGI U.S., Inc. (OTC BB: RGUS, Frankfurt Stock Exchange: RGJ) and Reg Technologies Inc. (TSX Venture Exchange: RRE.V, OTC BB: REGRF) are pleased to announce that based on a recent independent engineering assessment, the RadMax® diesel engine will use 20% less fuel than a gasoline engine, and 50% less fuel than a turboprop jet engine.
Robert Grisar, Vice President of Engineering, states, “The cost of gasoline has become one of the most important issues to North America and having a fuel efficient engine in automobiles and trucks will help reduce fuel consumption, and the demand for oil from offshore, exporting nations.
The engineering assessment, performed by an independent company to evaluate the RadMax® technology, states “The RadMax® Diesel Engine Specific Fuel Consumption (SFC) will be less than 0.4 lb/hp/hr.”
This is a useful parameter for engine comparisons. The SFC is the fuel flow rate per unit power (P) output, expressed as:
SFC = mf / P
To calculate the mass flow (mf), you need to know the mass of fuel. As an example, for gasoline, 1 liter = 740 g (and 1 US gal = 6.17 lb).
Typical average values of SFC for spark ignition, gasoline reciprocating piston engines are 305 g/kW/h = 227 g/hp/h = 0.5 lb/hp/hr.
For a turboprop engine, the typical value is 0.8 lb/hp/hr.
From these calculations, the RadMax® diesel engine uses 20% less fuel than a gasoline (petrol) engine (0.4 vs. 0.5), and half of a turboprop jet engine (0.4 vs 0.
![Cool 8)](./images/smilies/icon_cool.gif)
ABOUT REGI U.S., INC. AND REG TECHNOLOGIES INC.
Reg Technologies Inc. and REGI U.S., Inc. are developing for commercialization an improved axial vane type rotary engine known as the Rand Cam™/RadMax® rotary technology used in the revolutionary design of lightweight and high efficiency engines, compressors and pumps. The RadMax® engine has only two unique moving parts, the vanes (up to 12) and the rotor, compared to the 40 moving parts in a simple four-cylinder piston engine. This innovative design makes it possible to produce up to 24 continuous power impulses per one rotation that is vibration-free and extremely quiet. The RadMax® engine also has multi-fuel capabilities allowing it to operate on fuels including gasoline, natural gas, hydrogen, propane and diesel. REGI U.S., Inc. and its parent company, Reg Technologies Inc., are currently designing and testing prototype RadMax® diesel engines, compressors and pumps intended for aviation, automotive, industrial processes and military applications. For more information, please visit www.regtech.com.
ON BEHALF OF THE BOARD OF DIRECTORS
"John Robertson"
John Robertson
President, REGI U.S., Inc and Reg Technologies, Inc.
Contacts: REGI U.S., Inc and Reg Technologies, Inc.
John Robertson, 1-800-665-4616
READER ADVISORY
Statements in this press release regarding the business of Reg Technologies Inc. and REGI U.S, Inc. (together the “Companies’”) which are not historical facts are "forward-looking statements" that involve risks and uncertainties, including management's assessment of future plans and operations, and capital expenditures and the timing thereof, certain of which are beyond the Companies' control. There can be no assurance that such statements will prove accurate, and actual results and developments are likely to differ, in some case materially, from those expressed or implied by the forward-looking statements contained in this press release. Readers of this press release are cautioned not to place undue reliance on any such forward-looking statements.
Forward-looking statements contained in this press release are based on a number of assumptions that may prove to be incorrect, including, but not limited to: the impact of competitive products and pricing, the Companies' dependence on third parties and licensing/service supply agreements, and the ability of competitors to license the same technologies as the Companies or develop or license other functionally equivalent technologies; financing requirements; changes in laws, rules and regulations applicable to the Companies and changes in how they are interpreted and enforced, delays resulting from or inability to obtain required regulatory approvals and ability to access sufficient capital from internal and external sources, the impact of general economic conditions in Canada, and the United States, industry conditions, increased competition, the lack of availability of qualified personnel or management, fluctuations in foreign exchange, stock market volatility and market valuations of companies with respect to announced transactions. The Companies’ actual results, performance or achievements could differ materially from those expressed in, or implied by, these forward-looking statements, including those described in Reg Technologies’ financial statements, management discussion and analysis and material change reports filed with the Canadian Securities Administrators and available at www.sedar.com, and its Form 20-F filed with the United States Securities and Exchange Commission at www.sec.gov, and REGI’s Form 10-KSB annual report filed with the United States Securities and Exchange Commission at www.sec.gov. Accordingly, no assurances can be given that any of the events anticipated by the forward-looking statements will transpire or occur, or if any of them do so, what benefits, including the amount of proceeds, that the Companies will derive therefrom.
Readers are cautioned that the foregoing list of factors is not exhaustive. All subsequent forward-looking statements, whether written or oral, attributable to the Companies or persons acting on its behalf are expressly qualified in their entirety by these cautionary statements. Furthermore, the forward-looking statements contained in this news release are made as at the date of this news release and the Companies do not undertake any obligation to update publicly or to revise any of the included forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required by applicable securities laws.
The TSX Venture Exchange has neither approved nor disapproved of the information contained herein.