Red Bull RB16

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
Viruzpunk
Viruzpunk
1
Joined: 19 Jan 2020, 18:02

Re: Red Bull RB16

Post

If i m right i didn't see someone mentioning this little tweak :
he talks about it at 2.20 min, we can see it too at 2.00.

This kind of little details which make you proud of the guys, hard workers. =D>

the EDGE
the EDGE
67
Joined: 13 Feb 2012, 18:31
Location: Bedfordshire ENGLAND

Re: Red Bull RB16

Post

Viruzpunk wrote:
16 Feb 2020, 17:30
If i m right i didn't see someone mentioning this little tweak :
he talks about it at 2.20 min, we can see it too at 2.00.

This kind of little details which make you proud of the guys, hard workers. =D>
I’m pretty sure what he is referring to is the feeder for the S-duct, the small slits on the nose at to small and are probably for driver cooling

dxpetrov
dxpetrov
-7
Joined: 24 May 2012, 15:39

Re: Red Bull RB16

Post

Viruzpunk wrote:
16 Feb 2020, 17:30
If i m right i didn't see someone mentioning this little tweak :
he talks about it at 2.20 min, we can see it too at 2.00.

This kind of little details which make you proud of the guys, hard workers. =D>
Great video! Would be even better if it was made in English! 😂

the EDGE
the EDGE
67
Joined: 13 Feb 2012, 18:31
Location: Bedfordshire ENGLAND

Re: Red Bull RB16

Post

Mark Priestly on the RB16


User avatar
lio007
316
Joined: 28 Jan 2013, 23:03
Location: Austria

Re: Red Bull RB16

Post


bulldog
bulldog
2
Joined: 21 Jan 2020, 23:11

Re: Red Bull RB16

Post

base_1000 wrote:
14 Feb 2020, 09:47
Made some comparison gifs of the RB15 & RB16. Matched up & brightened.

Full:
https://cdn.imgchest.com/files/x84apcvow4l.gif

Close-ups:

Rear wing, rear-suspension & bodywork
https://cdn.imgchest.com/files/ak46acgep7z.gif

Sidepod & mirrors
https://cdn.imgchest.com/files/epyvdcno5yk.gif

Bargeboard & floor
https://cdn.imgchest.com/files/j6yxkcqo57w.gif

Front-suspension & brake-duct
https://cdn.imgchest.com/files/8b49zcvojyw.gif

Thanks.
Nice comparsion.

User avatar
SiLo
138
Joined: 25 Jul 2010, 19:09

Re: Red Bull RB16

Post

Looks like they have beefed up the upper wishbone and made the lower one smaller this year, the reverse of last year. I assume trying to get cleaner air lower down running along the barge-boards and top of the floor.
Felipe Baby!

pierrre
pierrre
56
Joined: 17 Apr 2019, 21:45
Location: a jungle somewhere

Re: Red Bull RB16

Post

here is a piece on the red bull racing rb16

thanks for the approval


User avatar
Bandit1216
21
Joined: 05 Oct 2018, 16:55
Location: Netherlands

Re: Red Bull RB16

Post

Bandit1216 wrote:
13 Feb 2020, 13:45
Is the steering rod inside the front-part lower wishbone? I can't see a separate steering rod.
Nobody?
But just suppose it weren't hypothetical.

User avatar
SiLo
138
Joined: 25 Jul 2010, 19:09

Re: Red Bull RB16

Post

Bandit1216 wrote:
18 Feb 2020, 11:50
Bandit1216 wrote:
13 Feb 2020, 13:45
Is the steering rod inside the front-part lower wishbone? I can't see a separate steering rod.
Nobody?
Most teams do this except williams I think.
Felipe Baby!

scarbs
scarbs
393
Joined: 08 Oct 2003, 09:47
Location: Hertfordshire, UK

Re: Red Bull RB16

Post

Bandit1216 wrote:
18 Feb 2020, 11:50
Bandit1216 wrote:
13 Feb 2020, 13:45
Is the steering rod inside the front-part lower wishbone? I can't see a separate steering rod.
Nobody?
It's a unique set up, the rack is midway between the top and bottom wishbones, but placed rearwards, nearer the front axle line than the front bulkhead. The track rod then reaches backwards to pivot on the upright behind the front axle line. It even passes behind the pushrod.
Easier to create an Ackerman setup, to turn the inner wheel and lower its ride height via the POU geometry

User avatar
Bandit1216
21
Joined: 05 Oct 2018, 16:55
Location: Netherlands

Re: Red Bull RB16

Post

scarbs wrote:
18 Feb 2020, 18:18
Bandit1216 wrote:
18 Feb 2020, 11:50
Bandit1216 wrote:
13 Feb 2020, 13:45
Is the steering rod inside the front-part lower wishbone? I can't see a separate steering rod.
Nobody?
It's a unique set up, the rack is midway between the top and bottom wishbones, but placed rearwards, nearer the front axle line than the front bulkhead. The track rod then reaches backwards to pivot on the upright behind the front axle line. It even passes behind the pushrod.
Easier to create an Ackerman setup, to turn the inner wheel and lower its ride height via the POU geometry
Hmmm. Don’t quite grasp it. I have seen Williams is the only team still putting a steering rod in mid airflow, which seems less efficient to me. I thougt all other teams place the rod in front of the lower or higer wishbone, and integrade the teardrop shape as both rods being one teardrop shape. But with the RB16 I can’t see any separate steering piece. I hope my English is suffient to get what I mean.
But just suppose it weren't hypothetical.

pierrre
pierrre
56
Joined: 17 Apr 2019, 21:45
Location: a jungle somewhere

Re: Red Bull RB16

Post

Image
tie rod is outside but not visible on earlier photos...it has been corrected. the tie rod ironically is on the aft position which is quite radical when comparing to the other cars and last years RB15. suspect this is done to move the tie rod closer to the bargeboards and influence aerodynamically as the tie rods is pretty much shaped like an aero element that is at an angle rather than some of the other cars that have their tie rod merely more streamlined instead

the tie rods are visible behind the push rods and those push rods are normally designed from an engineering perpective to the center line of the where the front wheel torque is

Image

scarbs
scarbs
393
Joined: 08 Oct 2003, 09:47
Location: Hertfordshire, UK

Re: Red Bull RB16

Post

Explained more deeply and with images on twitter here.


User avatar
godlameroso
309
Joined: 16 Jan 2010, 21:27
Location: Miami FL

Re: Red Bull RB16

Post

So did they design it to more precisely control front ride height during the toe curve? Also interesting is the shape of the track rod.
Saishū kōnā