McLaren MCL33

A place to discuss the characteristics of the cars in Formula One, both current as well as historical. Laptimes, driver worshipping and team chatter do not belong here.
User avatar
DiogoBrand
73
Joined: 14 May 2015, 19:02
Location: Brazil

Re: McLaren MCL33

Post

I know. The fact that they're effectively using a smaller lever lenght for the pullrod to act on, as well as the awkard angle at which it sits probably mean that a lot of force has to go through that rod to make the suspension work, and it almost certainly makes them lose on mechanical grip. But everything is a matter of compromise, and they think they can outweigh the loss in mechanical grip with the added aero grip from the "cleaner" suspension setup providing better flow to the rear. Perhaps it works as intended, perhaps it's ---, none of us know.

All I'm saying is: it's stupid to assume that their suspension is to blame for their poor performances with not one of us having information to back that up.

PhillipM
PhillipM
386
Joined: 16 May 2011, 15:18
Location: Over the road from Boothy...

Re: McLaren MCL33

Post

Oh definately, they'll have run the figures and decided the aero gain at most tracks is worth the mechanical compromise at others. But it's definately more of a mechanical compromise than anyone else so far.

roon
roon
412
Joined: 17 Dec 2016, 19:04

Re: McLaren MCL33

Post

Image

Such a different approach from the other teams. No heat exchangers or ducts other than the snorkel above the top of the fuel tank/monocoque. I speculate this was at least partly about managing the overall vehicle CoG height changes imposed by the halo structure.

User avatar
Zynerji
110
Joined: 27 Jan 2016, 16:14

Re: McLaren MCL33

Post

roon wrote:
29 Jun 2018, 00:08
https://pbs.twimg.com/media/DgzMnRCWsAAAcbk.jpg

Such a different approach from the other teams. No heat exchangers or ducts other than the snorkel above the top of the fuel tank/monocoque. I speculate this was at least partly about managing the overall vehicle CoG height changes imposed by the halo structure.
Oddly, it doesn't seem to have hurt everyone else that badly (halo cog).

User avatar
diffuser
230
Joined: 07 Sep 2012, 13:55
Location: Montreal

Re: McLaren MCL33

Post

I think its left overs from honda packaging. The Honda pu had a ton of stuff up there. So your left with a void up there. They probably didn't have time to move stuff up there. We'll see if that changes next year.

BrunoH
BrunoH
0
Joined: 18 Sep 2016, 13:18

Re: McLaren MCL33

Post

well they are having issues with low speed traction according to them.

i wold guess the change in suspension is what caused it since last year it looked ok.

Dipesh1995
Dipesh1995
104
Joined: 21 Apr 2014, 17:11

Re: McLaren MCL33

Post

New front wing without the edge vortex tunnels on the car this morning.

[media]https://mobile.twitter.com/F1/status/10 ... 04/photo/1[/media]

Pretty sure they tried something like this in the latter part of 2016.

Edit: They did https://www.motorsport.com/f1/news/anal ... rk-841308/

zioture
zioture
544
Joined: 12 Feb 2013, 12:46
Location: Italy

Re: McLaren MCL33

Post

Image

User avatar
Thunder
Moderator
Joined: 06 Feb 2013, 09:50
Location: Germany

Re: McLaren MCL33

Post

Also the Turning Vanes tested in France are back.
[media]https://twitter.com/McLarenF1/status/10 ... 1658175488[/media]

Edit: Bad Picture of the FW.
[media]https://twitter.com/AlbertFabrega/statu ... 2445301762[/media]
turbof1 wrote: YOU SHALL NOT......STALLLLL!!!
#aerogollum

Sevach
Sevach
1075
Joined: 07 Jun 2012, 17:00

Re: McLaren MCL33

Post


User avatar
mclaren111
280
Joined: 06 Apr 2014, 10:49
Location: Shithole - South Africa

Re: McLaren MCL33

Post

LuisFeF1:

Image

User avatar
PlatinumZealot
558
Joined: 12 Jun 2008, 03:45

Re: McLaren MCL33

Post

mclaren111 wrote:
28 Jun 2018, 14:05
Motorsport.com:

https://cdn-7.motorsport.com/images/mgl ... r-wing.jpg


Even Mercedes is copying McLaren !!
I am sorry. This only adds fuel to how bad McLaren chassis really is!
🖐️✌️☝️👀👌✍️🐎🏆🙏

Racing Green in 2028

BrunoH
BrunoH
0
Joined: 18 Sep 2016, 13:18

Re: McLaren MCL33

Post

agree

User avatar
turbof1
Moderator
Joined: 19 Jul 2012, 21:36
Location: MountDoom CFD Matrix

Re: McLaren MCL33

Post

Dipesh1995 wrote:
29 Jun 2018, 11:37
New front wing without the edge vortex tunnels on the car this morning.

https://mobile.twitter.com/F1/status/10 ... 04/photo/1

Pretty sure they tried something like this in the latter part of 2016.

Edit: They did https://www.motorsport.com/f1/news/anal ... rk-841308/
Looks like they are trying to figure out how to tackle next year's regulations.
#AeroFrodo

Dipesh1995
Dipesh1995
104
Joined: 21 Apr 2014, 17:11

Re: McLaren MCL33

Post

turbof1 wrote:
29 Jun 2018, 13:33
Dipesh1995 wrote:
29 Jun 2018, 11:37
New front wing without the edge vortex tunnels on the car this morning.

https://mobile.twitter.com/F1/status/10 ... 04/photo/1

Pretty sure they tried something like this in the latter part of 2016.

Edit: They did https://www.motorsport.com/f1/news/anal ... rk-841308/
Looks like they are trying to figure out how to tackle next year's regulations.
Exactly, that’s what I thought moments after posting. Maybe they’ll also bring some new bargeboards to test in the coming races to reflect the TR changes next year considering their importance in redirecting the front tyre wake away from the rest of the car will significantly increase due to the lack of outwash front wings.