2026 Aston Martin Aramco Formula One Team

[Otromundo]

Why wouldn't they. They've been testing and analyzing it for a month now,.../... that or their rig was immune to and/or absorbent of vibrations.

.

thats precisely where having a team full of engineers that have a history in f1 would make a difference .../... the guy that said that is working on solar preludes now though.

Maybe, we'll never know......

That's right. It's one of the things that pisses me off the most about racing competition: sometimes you'll never know.

[Rodak]

How the PU is mounted in the chassis???

From the 2026 F1 Technical Regulations:

5.6.17 Engine (ICE) mountings may only comprise six M12 studs for connection to the survival cell
and either four or six M12 studs for connection to the gearbox case. These studs may be
fitted on the survival cell, power unit or gearbox case, their installed end must be M12 and
their free end may be a different diameter.
The six mounting faces of the studs for connection to the survival cell must lie at [X PU, Y,
Z]=[0, ±270, 25], [0, ±360, 270] and [0, ±190, 440]. All six of these studs must be used.
The four mounting faces of the studs for connection to the gearbox case must lie at [X PU, Y,
Z]=[480, ±125, 25] and [480, ±265, 360]. All four of these studs must be used. Optionally, an
additional two studs may be used, provided their coordinates are at [X PU, Y, Z]= [480, ±150,
140].
A tolerance of +/- 0.2mm will be permitted on all of the above dimensions, all dimensions
refer to the centre of the studs. All dimensions in this Article refer to studs fitted
symmetrically about the car centre plane.
Any part which provides dditional load path, aside from the path through the studs defined
above, from the survival cell to the ICE or from the ICE to the gearbox case, is prohibited
unless this is incidental to its principal purpose. Furthermore any such part may provide no
greater structural connection between these pairs of assemblies than is reasonable for the
safe and reliable fulfilment of its purposes.

[mzso]

It was then AMR's job to manage Honda and they failed. You can blame AN, sure he has his share of blame, but the problem was probably already there by the time he joined. Cowell should have been managing that relationship before AN arrived. AN probably exasperated the issue by making late chassis changes.

I'm quite sure it was Honda management's job to manage Honda. I can't how it's AM's fault, if all they was told that everything's fine and AM leadership only got wind of Honda falling back on targets is via leaked rumors. If indeed that is how it happened, it's dishonest and a disrespectful.

Some reason my thoughts keep going to the missed testing at AVL in Graz Austria because AM was delayed with the chassis.

There were also rumors, that Honda made last minute changed to the engine design. So who knows...

[diffuser]

It was then AMR's job to manage Honda and they failed. You can blame AN, sure he has his share of blame, but the problem was probably already there by the time he joined. Cowell should have been managing that relationship before AN arrived. AN probably exasperated the issue by making late chassis changes.

I'm quite sure it was Honda management's job to manage Honda. I can't how it's AM's fault, if all they was told that everything's fine and AM leadership only got wind of Honda falling back on targets is via leaked rumors. If indeed that is how it happened, it's dishonest and a disrespectful.

Some reason my thoughts keep going to the missed testing at AVL in Graz Austria because AM was delayed with the chassis.

There were also rumors, that Honda made last minute changed to the engine design. So who knows...

Because if you don't, this can happen and it YOUR team.